Tools & Adapters
 
CardBus & PCMCIA
 
Storage Controllers
 
Async Serial I/O
 
Digital I/O
 
Networking
 
Memory
 
Panels & PIMs



Special Order

Archived Products

 

Terms and Conditions of Sale for Technobox, Inc.

 Standard Terms of Sale

The following summarizes Technobox's Terms and Conditions of Sale.

 

To facilitate order processing, please be sure to include in your order paperwork the items listed in the Order Checklist. You may also use the online Order Form. The Order Form is especially useful for placing credit card orders.

Price and Other Terms of Purchase

Prices and promotions (as applicable) are subject to change without notice. Prices for certain governmental, corporate, and institutional customers may be set forth in a bid or other written agreement between the parties
Payment is due before shipment, via credit card, wire transfer, or check, unless credit terms have been arranged in advance with the company. In such case, payment terms are Net 30, unless otherwise arranged by mutual agreement, and shall be stated in the Customer’s purchase order. For purchases made under Net 30 terms, Technobox, Inc. may access penalties for late payment beyond terms. The penalty will be at the rate of 18% per annum
Technobox, Inc. collects sales and use taxes for sales made to Customers in the State of New Jersey. The company shall not be liable for handling and/or customs charges for shipments outside the United States
Orders are non-cancelable/ non-returnable (NC/NR) and cannot be rescheduled

Technobox, Inc. warrants its products for ONE (1) YEAR from the invoice date. All other warranties, express or implied, including any warranties of merchantability and fitness for a particular purpose are disclaimed. Technobox, Inc. shall under no circumstances be liable for special, incidental, or consequential damages including loss of profit, even if it has been advised of the possibility of such damages; the maximum liability for all direct damages, if any, arising out of any action shall be limited to an amount not to exceed the purchase price of the product. 

(a)     Technobox, Inc. warrants that it has good title to the hardware Products it sells, and that it has proper authority to license the software Products it distributes

(b)     TECHNOBOX, INC. WARRANTS ITS PRODUCTS FOR MANUFACTURING DEFECTS AND IS NOT RESPONSIBLE FOR THE PERFORMANCE OR INTEGRITY OF ANY PRODUCT WHEN INCORPORATED WITHIN ANY CHASSIS, SUBSYSTEM, OR SYSTEM BY THE END-USER.

(c)     THIS LIMITED WARRANTY DOES NOT APPLY TO ANY PRODUCT OR PART FROM WHICH THE SERIAL NUMBER HAS BEEN REMOVED OR ALTERED OR THAT HAS BEEN DAMAGED OR RENDERED DEFECTIVE DUE TO:  TAMPERING, MISUSE, PRODUCT AND/OR PERFORMANCE ALTERATIONS, SHIPPING/HANDLING DAMAGE, NEGLIGENCE, ABUSE, AND/OR USER ERROR

(d)     Furthermore, this Warranty does not cover product failure due to disaster and/or accident

(e)     For Products not manufactured by Technobox, the company merely passes through to the Customer whatever end-user warranty the manufacturers or software publishers provide with their respective Products.

(f)       TECHNOBOX, INC. DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED BY LAW, INCLUDING MERCHANTABILITY AND USE FOR A PARTICULAR PURPOSE.

(g)     THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. 

 

LIMITATION OF LIABILITY

IN NO EVENT SHALL TECHNOBOX, INC. BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFIT OR OPPORTUNITY. FOR ANY PRODUCT NOT MANUFACTURED BY TECHNOBOX, INC., THE CUSTOMER'S SOLE AND EXCLUSIVE REMEDY IS STATED IN THE MANUFACTURER'S OR PUBLISHER'S END USER WARRANTY ACCOMPANYING THE PRODUCT. IN NO EVENT SHALL TECHNOBOX, INC.'S LIABILITY EXCEED THE REPAIR, REPLACEMENT OR COST OF THE SPECIFIC PRODUCT PURCHASED FROM TECHNOBOX, INC. SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR LIMITATION OF WARRANTIES AND/OR LIMITATION OF LIABILITY SO THE ABOVE DISCLAIMERS MAY NOT APPLY. CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM STATE TO STATE.

 

All orders, including those received via online service, are examined for completeness and availability of product prior to confirmation; an order is not considered accepted until verified; a formal verification will be transmitted (typically via fax or e-mail) upon acceptance

SALES ARE FINAL and cannot be cancelled, returned (NC/NR) or rescheduled, with the sole exception being authorized evaluations (evaluations may be allowed for specific products, at the discretion of Technobox, Inc., on a case-by-case basis; see Product Evaluations )
Returns for repair, etc. require issuance of a Return Materials Authorization (RMA)
FOB is Lumberton, NJ; a charge will be added for carriage insurance; insurance can be waived at customers risk; waiver requires in writing explicit acceptance of risk and loss
Orders are completed in their entirety, per line item, unless partial deliveries are expressly requested and arranged for with Technobox; otherwise, scheduled deliveries are unacceptable; Technobox will not schedule builds and deliveries based on a blanket PO; we do not hold inventory
Quotations are valid for THIRTY (30) days
Product inventory is subject to prior sale
Any quoted lead time is subject to parts availability and other factors

A complete copy of Technobox Terms and Conditions is available here:   Terms-and-Conditions.pdf


Tuesday, March 04, 2008 10:34:30 AM

About Technobox  |  Contact Us  |  Information Request  |  Support Request  |   Links   |   Help 
PLX  | VITA  | Mezzanines International  |  Wind River


Processor PMC (PrPMC)  | PMC and XMC Development Tools and Adapters
 Bus-Bus-Interfaces   |  SCSI PMC Adapters  | Digital-IO
RS232-RS422-RS485-Serial-Ports
Analog I/O  |  Memory  
Fiber Optic Technology  |   Ethernet PMC
Transition Panels and P2 Paddle Cards  | PIM - VITA 36  | Cables

 Be sure to check our
Table of RoHS-compliant Products, PMC Product Archive, and Special Order PMCs pages.

This Page Copyright ? 1996-2008 by Technobox, Inc
Technobox (R) is a registered trademark of Technobox, Inc.

Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River Systems (TM) are trademarks or registered trademarks of, and developed by, Wind River Systems, Inc, Alameda, California, USA.

Adobe, Acrobat, and the Acrobat logo
are trademarks of Adobe Systems Incorporated.


DHTML Web Menu by OpenCube

PCI2PMC, PMC2PCI, PMC modules, PMC card, PMC module, PMC Mezzanine, PMC carrier, RS-485, compact PCI, cPCI, VME mezzanine, XMC, XMC to PCI Express, PCI Express to XMC, PCIe, PCI Express, Serial PMC, Reprogrammable PMC, PMC SCSI, PMC Ethernet