Picture Page for Technobox P/N 5047 Micro Mezzanine Systems Electrical Conversion Module (ECM) - Miscellaneous - Socket Saver -- RoHS-compliant -- Industrial Temperature

The 5047 provides breakout of all ECM signals for debug, design validation and development. Plated through holes on the PCB allow soldering of probe wires to IO, Data, Power and Serial Identification signals. LEDs indicate presence of 3V, 5V, +12V, -12V and Ground. Elevates the ECM module by 2 mm and saves wear on the ECM carrier board connectors. Since this is a debug too there is no serial identification circuit.

In the example below a socket saver is mounted in between the ECM Carrier and a P/N 5188 ECM. For observation with an oscilloscope some of the FPGA and I/O signals are brought out on discrete wires, along with a ground reference. The ECM functions normally in this arrangement. Applications include custom cabling and test adapters.

Datasheet http://www.technobox.com/Datasheet-ECM-5047-Misc-4pgv1-A80401-press.pdf

micro mezzanine system electrical conversion module miscellaneous socket saver Technobox 5047

Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River Systems (TM) are trademarks or registered trademarks of, and developed by, Wind River Systems, Inc, Alameda, California, USA. Adobe, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.

Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River Systems (TM) are trademarks or registered trademarks of, and developed by, Wind River Systems, Inc, Alameda, California, USA.

Adobe, Acrobat, and the Acrobat logo
are trademarks of Adobe Systems Incorporated.