Picture Page for Technobox P/N 5188 Micro Mezzanine Systems Electrical Conversion Module (ECM) - Analog - Crosspoint Switch 8x8 -- RoHS-compliant -- Industrial Temperature

ECM P/N 5188 provides an AD8109 crosspoint switch for analog or digital signals with 250MHz of Bandwidth.

For single ended applications 8 inputs can be connected up to 8 outputs in any configuration. Each input is parallel terminated in 50 ohms.

For differential applications the user can select 4 differential inputs to connect with 4 differential outputs. Each pair of inputs is terminated in 100 ohms differential.

Internal gain of 2 compensates for 50 ohm output impedance of source.

Outputs can be disabled individually and are 50 ohms series terminated.

Voltage signal range 3.75V to -3.75V.

A serial identification circuit prevents use with incorrect FPGA IP

In the example below one signal source drives 8 outputs with the identical signal.

Applications include video, audio, analog signal and digital switching.

Datasheet http://www.technobox.com/Datasheet-ECM-5188-Analog-4pgv1-A80901-press.pdf

micro mezzanine system electrical conversion module miscellaneous crosspoint switch 8x8 analog Technobox 5188

Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River Systems (TM) are trademarks or registered trademarks of, and developed by, Wind River Systems, Inc, Alameda, California, USA. Adobe, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.

Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River Systems (TM) are trademarks or registered trademarks of, and developed by, Wind River Systems, Inc, Alameda, California, USA.

Adobe, Acrobat, and the Acrobat logo
are trademarks of Adobe Systems Incorporated.