Picture Page for Technobox P/N 5362 Micro Mezzanine Systems Electrical Conversion Module (ECM) - Interface - 8 channel Low Voltage Differential Signaling (LVDS) -- RoHS-compliant -- Industrial Temperature

ECM P/N 5362 provides eight channels of LVDS I/O with fixed 100 ohm termination. Speeds are up to 200M bits per second. All channels power up as inputs. Software can then enable outputs on a channel by channel basis.

In the example shown a Technobox P/N 4988 breakout panel provide two 9 pin d-sub connections for the LVDS channels. Each 9 pin d-sub connector carries four LVDS pairs and a ground. Note that on a fourth of the Technobox P/N 4988 breakout panel is in use, allowing other ECMs to use the remaining six 9 pin d-sub connections.

A serial identification circuit prevents use with incorrect FPGA IP. LVDS applications include replacement of Legacy ECL systems, digital video interfaces and general purpose LVDS I/O. Note that LVDS is not electrically compatible with ECL signaling levels, but offers similar speeds.

Datasheet http://www.technobox.com/Datasheet-ECM-5362-Interface-4pgv1-A90305-press.pdf

micro mezzanine system electrical conversion module interface 8 channel low voltage differential signaling (LVDS) Technobox 5362

Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River Systems (TM) are trademarks or registered trademarks of, and developed by, Wind River Systems, Inc, Alameda, California, USA. Adobe, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.

Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River Systems (TM) are trademarks or registered trademarks of, and developed by, Wind River Systems, Inc, Alameda, California, USA.

Adobe, Acrobat, and the Acrobat logo
are trademarks of Adobe Systems Incorporated.