The
Technobox P/N 6070 is an FPGA based PMC featuring 96 general purpose digital
I/Os distributed at the front panel J1 connector (32 I/Os), and at the rear
PN4 connector of the PMC (64 I/Os). Each group of eight I/O lines is
buffered by a 74ALV1642545, and the directionality of each group is
controlled by a signal from an Altera Cyclone I FPGA.
This is a reduced cost, updated and highly compatible revision of Technobox
P/N 2372 with easier to source components which should extend availability
for systems now using P/N 2372. A notable difference is that P/N 6070 has a
JTAG programming header for easier FPGA development.
See the following table for a
comparison of the 2372 and 6070 designs.
To help with moving designs from P/N 2372 to P/N 6070, Technobox offers a
migration tool which translates the 10K70 FPGA pin mapping file into an
EP1C4 FPGA pin mapping file. The migration tool can be downloaded from
http://www.technobox.com/VxWorksPciUtilities004.zip
This Page Copyright (C) 1996-2012 by
Technobox, Inc
Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River
Systems (TM) are trademarks or registered trademarks of, and developed by,
Wind River Systems, Inc, Alameda, California, USA.
Adobe, Acrobat, and the Acrobat logo
are trademarks of Adobe Systems Incorporated.
