Technobox Part Number 4972
SCSI Ultra 320 Dual Channel Controller
with Front and Rear I/O
(RoHS Compliant Lead-free)
The Technobox 4972 Dual Channel Ultra 320 SCSI Controller PMC is based
on the LSI Logic 53C1030 controller, providing two channels of parallel SCSI operating up to 320 MB/s in LVD mode. The SCSI interface
will automatically downgrade to support older “single ended” interfaces as well.
One SCSI channel connects to a standard 68-pin 0.050” center (“half pitch”) SCSI connector at the PMC front panel. The second channel is
available out the PN4 connector for rear I/O connectivity. The pinout of the PN4 is the same as prior generation Technobox SCSI controllers.
Termination is provided for each SCSI bus, and the termination will automatically conﬁ gure to support either Single Ended or LVD devices. As
delivered, the board has termination programmed as being always active, but it is possible to turn off termination via PLD re-programming for those
unusual applications not requiring termination on the controller.
PMC Adapter SCSI 320 Dual Channel RoHS compliant Industrial Temperature Technobox 4972
Friday, September 28, 2018 02:59:18 PM
About Technobox |
Contact Us |
Support Request | Quote
Order Form |
Quality Policy and ISO 9001:2015 Certificate 111746.00 |
Regarding Standards, Directives and/or Regulations such as ROSH, REACH and WEEE |
PMC and XMC Development Tools and Adapters / Carriers
Network Controllers and Adapters |
Storage Device Controllers / Adapters (m.2, U.2, NVME, CF, CFAST, IDE, and SATA)
Transition Panels and P2 Paddle Cards |
PIM - VITA 36 |
Also see our
Product Archive, and
This Page Copyright (C) 1996-2018 by
Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River
Systems (TM) are trademarks or registered trademarks of, and developed by,
Wind River Systems, Inc, Alameda, California, USA.
Adobe, Acrobat, and the Acrobat logo
are trademarks of Adobe Systems Incorporated.
DHTML Web Menu by OpenCube