Subscribe in a reader
SIC: 3577 and 3679
Technobox Part Number 8464
Basic 3U VPX-to-PCI Express (PCIe / PCI-e) Adapter
(RoHS Compliant Lead-free
The Technobox 8464 is a 3U VPX to PCI Express (PCIe) adapter that provides a convenient and cost effective means for developing 3U VPX boards in a personal computer environment. It can also be used for production testing of 3U VPX boards.
The adapter is a half-length PCIe card with the VPX card under test mounted close to the PCIe edge fingers to minimize signal lengths. When seated in a PC motherboard, the VPX card primary side faces upward to allow convenient access to components. Either a non-enclosed PC motherboard can be used, or the motherboard can be housed in a Desktop style PC cabinet with the cover remove to permit the VPX card to protrude through the side of the cabinet.
VPX differential wafers P1-9 thru P1-16, and P2-1 thru P2-16, are connected to 0.1-inch centered headers on the adapter for convenient access to VPX user I/O signals. VPX P1-1 thru P1-8 are reserved for PCIe lane connectivity, with one lane per wafer for a total of up to 8 lanes. The P1 PCIe signals are connected per VITA 46.4 standard PCIe on the VPX Fabric Connector.
The P0 VPX utility connector, which provides VPX power, is pinned out per VITA 46.0 P0 Utility Connector for 3U applications (Vs1 = +12V, Vs2 = +3.3V, Vs3=+5V). The 3U power on P0 is incompatible with 6U power, so this adapter must only be used with 3U VPX boards.
The adapter has a +12V to -12V POLA DC to DC converter on board which provides -12V to the -12V_AUX power rail on the VPX P0 connector. Since the PCIe edge finger does not provide +5V power, P0 “Vs3” +5V power can be supplied via a 4-pin Molex-style connector at the back edge of the adapter. This is connected to a +12V/+5V power connector normally used for powering HDD media in a PC. The Molex connector also provides additional power for the +12V rail. Vs2 3.3V power comes directly from the PCIe edge finger power rail. The VPX standard specifies a 25 MHz reference clock (REF_CLK+/-) on P0; however, this adapter wires the 100MHz PCIe clock to these pins, a practice which is allowed by VITA 46.4. VPX cards relying on a 25 MHz clock frequency on REF_CLK will not work with this adapter. VITA 46.4 Rule 4-1 suggests PCIe-connected VPX cards should not rely on REF_CLK at all, using instead a locally generated 100MHz clock for the PCIe interface. VPX cards might also be designed to operate with either 25 MHz or 100MHz REF_CLK.
An on-board DIP switch establishes VPX Geographical Address/Parity and also controls the non-volatile memory read-only (NVMRO) signal to the VPX board.
The adapter provides VPX guide pins. The key orientation can be easily changed by loosening the nut that secures the guide pin and then re-securing the guide pin with an orientation compatible with the VPX board under test.
On-board jumpers provide connection between either the VPX IPMA or VPX IPMB I2C busses and the single IPMI connection to the PC motherboard. Alternatively, users can wire-in an external IPMI connection using these headers if the PC motherboard does not support IPMI.
JTAG continuity between the VPX board and the PC motherboard is provided via a supplied 10-pin ribbon cable. Users who wish to access the VPX board JTAG independently of the PC motherboard can remove this ribbon cable and connect a suitable JTAG cable, such as an Altera USB-Blaster cable.
Basic 3U VPX to PCI Express (PCIe / PCI-e) Compact Adapter 1 Lane Lead free RoHS compliant Industrial Temperature Technobox 8464
Thursday, September 20, 2018 10:20:06 AM
About Technobox |
Contact Us |
Support Request | Quote
Order Form |
Quality Policy and ISO 9001:2015 Certificate 111746.00 |
Regarding Standards, Directives and/or Regulations such as ROSH, REACH and WEEE |
PMC and XMC Development Tools and Adapters / Carriers
Network Controllers and Adapters |
Storage Device Controllers / Adapters (m.2, U.2, NVME, CF, CFAST, IDE, and SATA)
Transition Panels and P2 Paddle Cards |
PIM - VITA 36 |
Also see our
Product Archive, and
This Page Copyright (C) 1996-2018 by
Tornado (TM), VxWorks (R), the Wind (R) kernel, WindLink (TM), Wind River
Systems (TM) are trademarks or registered trademarks of, and developed by,
Wind River Systems, Inc, Alameda, California, USA.
Adobe, Acrobat, and the Acrobat logo
are trademarks of Adobe Systems Incorporated.
DHTML Web Menu by OpenCube