Product Information

The Technobox, Inc P/N 5264 Compact Flash Adapter provides an interface between the PCI bus and two Type-I or Type-II Compact Flash (CF) devices mounted on the Adapter. One CF device, connected to the Primary IDE channel, is available out the front-panel. A second CF device, connected to the Secondary IDE channel, is mounted on the body of the adapter and is secured with a locking mechanism. Additionally, the Secondary IDE channel of the adapter can interface other IDE/ATA devices, via its rear I/O connector (PN4).

Built around a Silicon Image PCI-680 IDE controller chipset, the product supports the Ultra 133 data-transfer protocol over the IDE channels. It also supports slower bus-master data transfer rates to accommodate hard disk drives (HDDs) and CF devices that do not support Ultra 133. The signals for DMA transfer support on Compact Flash are connected to the 680 controller.

Additionally, the sites can be set to operate as either master or a slave device via DIP switches on the board. On-board BIOS, provided by Silicon Image and resident in flash memory, supports boot up configuration. This feature is supported only on Intel platforms. Two LEDs on the front-panel provide activity status for the primary and secondary IDE channels.

Related Products

• Compact Flash (CF) Adapter PMC w/ Guidance Plate Kit (w/o Media) (6677)

• Compact Flash (CF) Guidance Plate Retrofit Kit (6735)

• Dual CFast Adapter XMC (w/o Media) (6183)

• Conformal-Coated Version of P/N 5264 (5756)

• Basic IDE Controller for P/N 5251, P/N 5252, P/N 5263 (5703)

• IDE Controller PMC w/ 44-Pin Connector (5252)

• IDE Controller PMC w/ 40-Pin Connector (5251)

• PMC Socket Saver (4690)

• 5V Only Version of P/N 4299 (4638)