Product Information

The Technobox, Inc. P/N 5284 8-Port Async Communication Adapter provides eight industry standard 16550-based UARTs using RS232 signaling levels. Each port provides the full set of data and modem control lines configured for DTE operation.

All eight ports are available out the PMC front panel on J1 68-pin SCSI style connector. All eight ports are also wired to the PN4 connector at the rear of the PMC, allowing connection to the VMEbus P2 connector for host processors supporting rear-I/O. These signals are carried on the “a” and “c” rows on the P2 connector. There are other standard connection configurations for the P0/J0 (enhanced VME and cPCI) and the “d” and “z” rows of an enhanced DIN connector.

The P/N 5284 is a RoHS and Industrial temperature upgrade for the Technobox, Inc. P/N 2229 and is a drop-in replacement. While the 2229 used a PLX 9052 bridge chip and is useable on 5V PCI signaling carrier cards only, the 5284 uses a PLX 9030 bridge chip allowing use with 3V or 5V PCI signaling carrier cards.

Related Products

• Cable Assembly (10.0 ft) 68-Pin SCSI Terminations w/ Jackscrews (5912)

• Cable Assembly (6.0 ft) 68-Pin SCSI Terminations w/ Jackscrews (5911)

• Cable Assembly (3.0 ft) 68-Pin SCSI Terminations w/ Jackscrews (5910)

• Cable Assembly (1.5 ft) 68-Pin SCSI Terminations w/ Jackscrews (5909)

• PMC-to-PCI Express Adapter - 1X (5243)

• 8-Position DB-9 Male Transition Panel w/ 68-Pin SCSI Connector on Each Side of Panel (5100)

• 8-Position DB-9 Male Transition Panel w/ SCSI Connector on Opposite Side of Panel (4988)

• PMC-to-PCI Adapter 64-Bit (4954)

• PMC-to-PCI Adapter 64-Bit 33 MHz (4930)

• PMC-to-PCI Express Adapter - 1X (4749)

• PMC-to-PCI Express Adapter - 4X (4733)

• PMC Socket Saver (4690)

• Transition Panel w/ 16 RJ45 Connectors (3301)

• 68-Pin Generic Rear I/O PCI Interface Module (PIM) (3190)

• 64-Contact Discrete Wiring Transition Panel (1868)

• 16-Position RJ11 Modular Jack Transition Panel (1866)